S E LOGO SHEARDOWN

WATERTIMER

A range of vandal resistant, wall mounted valves and basin spray tap.
Suitable for time delayed hand washing and showering applications.

In order to resist vandals, all external parts are of metal construction, with the valve bodies and internal working parts made of dezincification resistant materials. The push caps are 'secretly' fixed and require two tools to be applied in sequence to remove them. The button actuators on the ducted valves cannot be stolen from the front.


See drawing of valve

WATERTIMER 450

A basin spray tap with a long reach nose. Ideal for hand washing under clean running water, with the tap continuing to run for about 10 seconds after each actuation. The spray outlet incorporates an adjustable flow control. This enables the water output to be limited to just that required, over a wide range of supply pressures.
WATERTIMER 450 BASIN SPRAY TAP
See drawing of valve

WATERTIMER 452S & 453S

Surface mounted valve for hand washing (452S) with about 10 second time delay, or for showering (453S) with approximately 25 seconds time delay. The need for re actuation avoids the valves being left running and so greatly economises on the use of hot water.
SURFACE MOUNTED WATERTIMER
See drawing of valve

WATERTIMER 452C & 453C

Concealed delayed closing valve, similar to the surface mounted valve shown above. Ideal for hand washing (452C) through a separate spout ,or for showering (453C) via a concealed riser pipe.
CONCEALED WATERTIMER
See drawing of valve

WATERTIMER 454T & 455T

Ducted delayed closing valve with tapered button. The 454T is suitable for hand washing, or the 455T for showering applications in sports centres, swimming pools etc.
TAPERED BUTTON WATERTIMER
See drawing of valve

WATERTIMER 454R & 455R

Ducted delayed closing valve with recessed button. Specify the 454R for hand washing and the 455R for showering applications. The flush mounting reduces the risk of personal injury and so makes this fitting ideal for safe use in prisons and similar secure institutions.
RECESSED BUTTON WATERTIMER
See drawing of valve

WATERTIMER 456

Delayed closing shower valve with shrouded anti ligature button.

For installations that do not allow rear access, this valve is recessed into solid block work. It is concealed by the large cover plate which is secured by anti tamper screws.

Ideal for showering applications in mental health units, prisons and similar institutions.

WATERTIMER 456 ANTI LIGATURE SHOWER VALVE

CATALOGUE
NUMBER
MOUNTING CONTROL
BUTTON
APPROXIMATE
DELAY
SPECIFY
FOR
450 Basin Exposed 10 sec's Handwashing
452S Surface Exposed 10 sec's Handwashing
452C Concealed Exposed 10 sec's Handwashing
453S Surface Exposed 25 sec's Showering
453C Concealed Exposed 25 sec's Showering
454R Duct Recessed 10 sec's Handwashing
454T Duct Tapered 10 sec's Handwashing
455R Duct Recessed 25 sec's Showering
455T Duct Tapered 25 sec's Showering
456 Recessed Shrouded 25 sec's Showering

Return to Home page

Copyright © 2000 Sheardown Engineering Ltd. All rights reserved.
Company registered in England
Reg No. 1140673